home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

Reply
 
Thread Tools Display Modes
Old 03-16-2022, 02:18 PM   #26
76RA24
Board Member
 
Join Date: Sep 2015
Location: BC
Default

back on the road.

now I am playing with a spare shifter I got from +Kardboard+ a couple years ago.








also working on 3d printed shifter cage bushings.


Also got the Shifter Pins and Collar
381526 1 Gear Selector Joint.
381528 2 Pin.

Will post the measurement pics, and install pics.

Last edited by 76RA24; 03-16-2022 at 02:27 PM..
76RA24 is offline   Reply With Quote
Old 03-16-2022, 02:26 PM   #27
Broke4speed
Board Member
 
Broke4speed's Avatar
 
Join Date: Oct 2009
Location: Marionville, Ontario, Canada
Default

Hell yes, 3D printed cage bushings. I've done swaybar and endlink bushings in TPU and they're holding up great!
__________________
1984 244/ AQ171C / T5
Broke4speed is offline   Reply With Quote
Old 03-16-2022, 10:57 PM   #28
76RA24
Board Member
 
Join Date: Sep 2015
Location: BC
Default



I feel I was true to TB by not changing the rear housing gasket.

havent moved it off the ramps yet but feels great while setting the reverse gate thing.


I did change the pins and collar... will post pics later after I create another imgur album.

also made new foam insert for around the shifter... hope it helps.

PEte
76RA24 is offline   Reply With Quote
Old 03-17-2022, 12:01 PM   #29
76RA24
Board Member
 
Join Date: Sep 2015
Location: BC
Default

Shifter Pins and Collar
381526 1 Gear Selector Joint.
381528 2 Pin.

stupid things.

all changed out.
imgur photos
https://imgur.com/a/9vy0qwH

when reassembling leave the spring collar attached.


its a bastard to put on after.
76RA24 is offline   Reply With Quote
Old 03-25-2022, 08:28 AM   #30
Old Iron
I Roll
 
Old Iron's Avatar
 
Join Date: Jun 2009
Location: Dela-Where?
Default

Still doing lots of good work. I too had to figure out how to remove that shifter/collar. I couldn’t get the engine and trans into the car with it all assembled and the pin at the bottom of the shifter was seized.
__________________
Turbobricked


Quote:
Originally Posted by Anonymous View Post
No sarcastic replies from Redwood Chair necessary
Old Iron is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.