VolvoLatAm
Active member
- Joined
- Oct 4, 2019
- Location
- Colombia
I have an 1982 244
2inch 50.8mm driveshaft for the first 2 sections of it and then something covers the shaft
Measuring the actual u joints while on the car (pre-ordering parts while still driving my car) seems difficult without an upgraded caliper from a standard one...
1.) https://www.skandix.de/en/spare-par...oint-propeller-shaft-universal-joint/1000113/
"For the Series 200 and 700 there are various drive shafts that are not exactly assigned, but are distinguished only by shaft types.
In the 200 series up to 1984 there are two types (1140 and 1310) They can be easily determined by the diameter of the front shaft.
Type 1140: 44.5 mm diameter
Type 1310: 50.8 mm diameter"
Cool, I get this note, I have Type 1310 because of my 50.8 mm driveshaft
2.) https://www.skandix.de/en/spare-par...oint-propeller-shaft-universal-joint/1000114/
"Volvo 200: For propeller shaft type 1140. Only the rear
joint at the differential!
In 2003, the diameter of the
Universal joint can be measured!"
Because of my 50.8mm 2 inch driveshaft, I guess this excludes me for this one because I have Type 1310. Also, it says only for the rear u joint.
3.) https://www.skandix.de/en/spare-par...oint-propeller-shaft-universal-joint/1000112/
Volvo 200: drive shaft For 1140, only front and
middle joint!
I don't have 1140, so this is not for me
The first link seems like one of my u joints, but this is all still very confusing for me. Do I just use 3 of the first type since my car is 1982 (pre-1985), 50.8mm driveshaft, and type 1310?
2inch 50.8mm driveshaft for the first 2 sections of it and then something covers the shaft
Measuring the actual u joints while on the car (pre-ordering parts while still driving my car) seems difficult without an upgraded caliper from a standard one...
1.) https://www.skandix.de/en/spare-par...oint-propeller-shaft-universal-joint/1000113/
"For the Series 200 and 700 there are various drive shafts that are not exactly assigned, but are distinguished only by shaft types.
In the 200 series up to 1984 there are two types (1140 and 1310) They can be easily determined by the diameter of the front shaft.
Type 1140: 44.5 mm diameter
Type 1310: 50.8 mm diameter"
Cool, I get this note, I have Type 1310 because of my 50.8 mm driveshaft
2.) https://www.skandix.de/en/spare-par...oint-propeller-shaft-universal-joint/1000114/
"Volvo 200: For propeller shaft type 1140. Only the rear
joint at the differential!
In 2003, the diameter of the
Universal joint can be measured!"
Because of my 50.8mm 2 inch driveshaft, I guess this excludes me for this one because I have Type 1310. Also, it says only for the rear u joint.
3.) https://www.skandix.de/en/spare-par...oint-propeller-shaft-universal-joint/1000112/
Volvo 200: drive shaft For 1140, only front and
middle joint!
I don't have 1140, so this is not for me
The first link seems like one of my u joints, but this is all still very confusing for me. Do I just use 3 of the first type since my car is 1982 (pre-1985), 50.8mm driveshaft, and type 1310?