• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Hub cap mounting after flipping the wheels

Joined
Sep 9, 2007
Location
Hellas(Greece)
Hello,
I'm using 25mm spacers (et48 steelies) and as you can see I manage to mount the hab caps on the ring from the spacers that exceeds over the wheel.




But I'm planning to flip the wheels in order to achieve zero offset an therefore will be no need for the spacers...but then,where can I mount the hab caps?
I'm thinking if I can weld a ring 10mm around the wheel center...what do you guys think?
 
there are different height lug nuts too - you could get the sort without a top and then it's a matter of how long the bolts are. It looks mostly like you have a large empty space inside your current lug nuts.
 
Back
Top