Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hello Guest, welcome to the initial stages of our new platform! You can find some additional information about where we are in the process of migrating the board and setting up our new software here
no, but do it anyway
I plan on leaving from Shasta Friday morning and likely taking the scenic route through Bend to stop and pick up ciders and beer at Avid Cider/Immersion brewing if anyone going north wants to caravan, hit me up to coordinate if you are into that adventure.
I can't seem to find a resolution by searching for what anyone has done about the cable type clutch fork and it being too weak to last with a stiff pressure plate. am I missing something or is this just a case of the replace it with another when it bends/breaks situations, or is there a beefier...
I searched some and didn't really see any definitive long term feedback on the do88 radiator. I see some of you have installed one, and was wondering if they are worth the premium, or if there is another decent drop in aluminum unit like the ones I have seen on Ebay before. I need to replace the...
Trying to get an idea of when and where the southerners of me are leaving, and the proposed route. I might not be able to leave SC till 6PM that Friday depending on Jen's schedule. I would like to hook up with you guys on your way up if it works out, haven't been in the pack of Volvo's to Davis...
A co-worker of mine is moving to Davis Ca. in August, and is Whoring himself out to as many forums and Avenues as possible. If anyone knows of a good shop to work at or knows someone else who does, let me know so I can tell him and get him hooked up with them.
Thanks.
In Dec. of 08' I was driving to work Via highway 9, going faster than I should have for the conditions on the road, came around a corner and lost traction in the rear, fish tailed a couple times and stuffed the front right into the side of the mountain. One week later I had changed the front to...
What does it take to do this, I have the ms v2.2 box, a 3 wire dist. and the 0 227 100 139 ignition module. I've spent some time looking but can't find info on spark only. maybe I havent looked hard enough, If I could get some support on this it would be great.
Does anyone have any good solid info on the 1030 and 1031 original lsd? like what causes the cross shafts break and if there has been anything to do to upgrade them, how they work, service intervals on the clutches and if there is, what friction material is on them or any other technical info? I...
Has anybody heard of or have any information on an "L" cam for red block motors?
I was at the bone yard today looking for a "B" cam, and pulled the cam out of an 82 b21f thinking it would be a "B" and the stamping on the back was "L"
I looked at the charts for factory volvo cams and can't find...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.