Search results

Well after going to scrap it. I figured I'd give it new life again as a daily, if the acura has any down time. Here is what I've done today. More to come..

So any americans or Steve, GOt something in the works??? I want to drive some mountain roads and have a good time. The last two I went to were good but ended abruptly, well the last one anyway :-P . and the maine one the road was closed so maybe this year we get something going before the...

I took off the cold side housing today and To my duress I noticed that a small bit of the compressor wheel is missing on the outside edge. My Q is, Is this most Likely Broken off or done for some Balance reason??? I figure Broken and So I would have to get a new Compressor wheel.

What Modifications would I have todo to fit 940 E-codes onto a 1990 745T???

so yea Tried this last year but most of you guys I guess are pussies ;) and can't seem to race there car's or something. anyway's the First one is on May 1rst. here is the link to the site and I hope to see some of you there.. http://www.twinlakesmc.org/ and go under events.

I'm going to be Registering for Solo 1 This year and wondering if Anyone else was. And If anyone would want a Track day @ Mosport or Shannonville or any other Track Track. Even Go with the Bimmer Club for Driving School. get some High speed Fun in Legally and see how Slow your car really is when...

What Gear sets can you get for the Dana 30 The lowest I found so far is 3.07:1 but I would like 2.50:1 if it exsist's or something around that. Thanks for the Info chaps

Yea I'm bored as fook and since there are so many Ontario Volvo owners (and close states people) We should get something to work during winter like late Jan, early Feb. I'll search for some good roads in Ontario Or talk with my COllege or something to See if we can setup something in a parking...

Would we be able to say have a car of the month rather then car of the 6 month's??? It'd be kewl to read about other rides then just one everytime someone visit's the board. with 5000+ members think we should be able to do it. And since the Feature car's are archived so they won't be lost...

There are alot of Jeep's at the Local yard and was wondering which ones have the dana 30 so I can grab an LSD or Locker from one of them. Years and models would be great :-D

OK lh 2.2 1988 740 Turbo... /w side mounted distro. anywhay's she's really fubared. the Car Idles beautifully but bring her up into any throttle or above 2000rpm and she'll cough and sputter. Bring it up to say 2500rpm then it'll drop down to 2000 then go back up then back down... I've...

What' the resitance to hook Up to your head temp sensor to get it to run leaner? It's some sort of variable resistor type thing?

What are the block Limitations for the B6284T. That's all I want to know. nothing more nothing less :) . And I searched found around 450hp on one thread but that was stock crank limiting..

OK we've semi made a room for us to chat over the internet with Team Speak ftp://ftp.freenet.de/pub/4players/teamspeak.org/releases/ts2_client_rc2_2032.exe can be found here to DL. the Ip is 68.209.146.164:8767 to join the room so let's hear ya there

So yea that's me new clutch'n'flywheel sorry for the darkness but meh camera is cheap.

I'm getting a 100% stronger PP from Vintage performance and they say I need "It has to be longer than stock and one from the Borg and Beck clutches, Pt # 672122 on bearing FKF 238022, should work. " This is going on my 1988 740 with hydraulic clutch actuator. Is there anyway I can use the...

Wondering if ya can squeeze a wrench in there to tighten um up w/o having to take off the mani from the head/block. Mitsu turbo so it bolts on no nuts :(.

I just got my Digi cam and Going to start a thread about me mods so here is the last thing i've done. My 1986 Mack truck Intercooler. The performance gain was amazing no more bog and pull's and pulls till clutch limitations kick in but that will be cured soon. If you have any...

Just wondering how much a burnt out clutch would affect the car other than normal slipping. For instance: My car won't due a burnout anymore it'll just bog the engine (brakestand style anyhow) My car feel's slower than it should but watching the rev's and speed nothing noticable unless i'm...

So I was thinking of a meet/event day in new york or michigan (one of the north eastern states) do some hot laps maybe or 1/4 and a dyno session. I'm not to familiar with what's tracks and such is out there in those states. So if anyone could maybe host and help organize something that would...