Search results

Im used to older Volvos - Bentley's and Green Books.) What is the best source for repair documentation? This 2010 XC70 is the newest Volvo i've ever owned.

I am not sure if it was in a booth. They had done some work for me in the past on a newer car and it looked fine. I had the paint code, but I was told with a car that old i should have it matched with the fuel door because of the wear on the paint over the years. I thought with a really good...

I have this project that I have been restoring for years, but I've run into some body work problems here near the end. The hood needed to be painted because of some severe scratches. I had the paint matched using the fuel cap door. A body shop painted the top side for me and it came out not...

I just bought these from the Wish site. I think they were identical to some I bought here in the US for like 5x the price. They fit the virgos I restored.

Well if that's the case it should work on n my 95 965? I didn't see where the ends attach?

I suspect it's for a 700 series?

So I have this beautiful 1993 244 white, that I spent two years restoring for my daughter. I had done just about everything to this car. Including a head job and mostly new everything. I had a problem where it was showing that it was running a little hot. I wasn't sure if it was the temp...

Looking for some help on the proper install of the rear anti-sway bar. There is a bolt with a very thin top. Should this go behind the control arm and then through the anti sway bar. I don't see how it can because the ball joint is in the way. Is the back of the sway bar just supposed to...

Anyone know of a good write up with pics of the parking brake assembly on late model 240s. Both the green books and the Bentley manual show earlier models with the dial adjuster and not the newer set ups. I'm having a hell of a time getting it back together correctly.

Alternator a/c power steering brackets bushings? Can anyone point me to some discussion or related info on the differences between the soft and hard rubber bushings? In the past, i replaced with aftermarket urethane bushing. I haven't discovered much difference.

I bought a set of Skandix ecodes from FCP about 8 months ago and I'm in the final stages of getting it running. However, I somehow lost the wiring diagram that tells me which wire goes to which. Any help??

Is there any point in these tires anymore? I have replaced these in my working 240's with a full-size tire (the best from the last set on the car.) I would guess a restorer for show cars might want them, but they are cracked and I can't imagine driving on them even to get home. Should I...

Working on a 93 244 automatic. Put a new starter in, but the ignition was acting up at the same time. 1) is there a method to test a switch BEFORE installing? 2) for the love of god, who designed the screws that hold the switch to the back of the key shaft. Why are they standard instead...

New starter has one or two more clips. Which one should i use for the yellow/blue ignition female plug? 1, 2, or 3 Thanks!

T

Drivers side and passenger turn signal acting up. These google photo links are actuallyt videos of the turn blinking. My passenger side turn signal looks like this: https://photos.app.goo.gl/3VhMgzsnn7sC9ppv7 My drivers side turn signal blinks like this...

Headlights are staying on, even with keys out of the ignition. If i push down on the steering wheel, the headlights go out, pull up a little and they go on. Any suggestions?

Does anyone know if there is a problem with using the connectors in the photo to wire car wires? I'm rewiring a new connector for the melted main headlight relay plug. It seems to work fine, but I wanted to make sure before I put it all back together.

Still dealing with the ramifications of trying to install keyless entry and having moded the cluster at the same time. Now i dont know what is causing problems where. Cluster is doing all kinds of things. Turn signals flashing on opposite sides, speedometer bouncing, turn signal dash lights stay...

It's not like I haven't researched this....including: examples: Art's http://cleanflametrap.com/keyless3_receiver.html Oz Volvo's https://ozvolvo.org/discussion/12542/adding-keyless-entry-to-a-240-with-factory-central-locking Many Youtube videos I just don't understand the wiring diagrams...