Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello Guest, welcome to the initial stages of our new platform! You can find some additional information about where we are in the process of migrating the board and setting up our new software here
The annual Volvos @ Ikea meet returns for the 2012 season!
This is the third time the spring version of the annual Volvos @ Ikea meet will be held at the Stoughton, MA location.
When?
Sunday, May 6th. 11:00 AM- 3:00 PM
Where?:
Ikea of Stoughton, MA.
1 Ikea Way, Stoughton, MA
CARAVAN INFO...
i have run an HKS SSQV on my 744 tic SE before, but the car didn't like it..it pulled a check engine light and would actually stall out if i let off under low RPM conditions. with my new turbo and intake setup, i need to run a BOV again, or some type of recirculating valve. i have an HKS SSQV on...
Anyone ever tidied up the firewall wiring on a redblock? I am doing the Nathan intake install as well as a few other things and would really like to hide some of it, it really is an eye sore..and I'd love to see where anyone has hid it or if anyones found a way to clean it up? Thanks :cool:
This is a meet for ALL EURO CARS. Whether you're into Volvo, Saab, VW, Audi, BMW, Mercedes, or whatever it be..we want to see you there! The Volvos @ Hooters meets have been a great success, and are great publicity for this franchise. It is time we take this to the next level and turn this into...
So my 744 tic has had this weird problem that came up back in April for a couple days, then went away. After I degreased my engine bay in April, I took the car out for a spin and it was running way too rich (AEM UEGO was telling me the AFR was 10.00 or lower).
I tried to look for anything...
Had the overdrive (arrow) light go on randomly one day for a few minutes, then go back off. I figured the relay was on its way out. Now about a week later its on all the time. I tried swapping in a different overdrive relay and it didn't fix the problem. When I pull the relay, the light goes...
So I have this AEM Digital oil pressure gauge. It includes a sending unit. The sending unit is 1/8 NPT thread. Is it possible to just replace the oil pressure sending unit on the block with this sending unit and use my gauge instead? I feel that the digital oil pressure gauge is more accurate...
Its time we have another Hooters meet. The last Hooters meet was in March, and it was still pretty cold out. I figured this time, it would be a nice end of summer meet, where its not too cool but not hot anymore. Enjoy a good time!
This meet will be from noon until whenever on Saturday, 9/17/11...
Its official! Volvos @ Ikea 2011, ROUND TWO. Same location- Stoughton, MA.
The official date is: Saturday, July 23rd 2011, in the East lot of Ikea (same place as it was in April).
The address is: 1 Ikea way/ Stoughton, MA.
TIME: 11 AM-3 PM!
RULES:
As always, there are rules to follow at this...
Ok, so finally got ANOTHER MSD coil and its time to hook up the 6A box at last.
so for the wiring, it seems pretty straight forward..but i have a question.
the heavy black and heavy red wires are accounted for, same with the orange and black (those go to the coil).
this leaves the white wire and...
Yep! We have only done this once before, but due to the overwhelming support I received for creating the first Volvos @ Ikea meet in MA, I decided we'd have a mid-summer ROUND TWO of this meet.
Tentatively, this will be on some Saturday in July, not sure when yet..still working out the details...
Here are a few of my pictures. I have over 100 pictures in my Facebook album, and will add more soon..here are just a few to get it started. Thank you again to everyone for coming, I am so glad I could keep this tradition alive.
<img src= http://oi53.tinypic.com/28ukzyv.jpg>
<img src=...
when i start my '90 744 TiC, the volt gauge reads what looks to be battery voltage. if i just drive away like that, my HIDs might not even want to turn on. however, if before i drive away i rev it up a little bit..the volt gauge goes to the 1/2 way point or further (normal driving voltage), and...
My current cluster is shot. Sourced a replacement, and I have it apart right now. However, I can't seem to figure out how the speedo comes out? Also, once its out, how do I set the mileage? Thanks
Just realized I didn't even post this here on TB.
We are having the "annual" pre-spring NEC Volvo meet, at Hooters.
Last year, it was down in Warwick, RI. The Hooters didn't have much talent and the state police now despise CT Volvo drivers, so I have moved this meet to Saugus, MA.
The Hooters...
Since the last thread was more of a feeler and was for a different location, I am creating this thread to get an official attendee list.
This meet is on SATURDAY APRIL 30TH, 2011.. IN STOUGHTON, MA.
The address is: 1 Ikea way/ Stoughton, MA.
The Annual Volvos @ Ikea meet has been moved to...
Ok SO. I have e-codes here for my SE. All that was included were the lights themselves (headlights/cornerlights), lower headlight trim, and two little black trim pieces that screw onto each headlight that look like they have slits in them for the grille clips to go into.
Trying to put a list...
Ok, so I have this AEM digital water temp gauge here:
http://www.aemelectronics.com/water-temp-gauge-100-300f-763
I would like to hook it up soon..its pretty straight forward for the wiring..the question I have is with the temperature sensor. It says the gauge temp sensor uses 1/8" NPT external...
Trying to help my friend diagnose a no-start on his 744.
He went to the gas station earlier, had 1/4 in the tank. Put half a tank in, it was just cranking. He let it sit for a few minutes and eventually it started up and ran.
He drove around doing pizza deliveries during the day, and a few hours...
I seem to remember a thread not long ago where someone was stocking Nuke Performance parts. I am looking for a B230FT fuel rail from them. I also need to know what needs to be done to fit it..so who here has one and how much of a pain was it to install? I will also be installing my Cosmo AFPR to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.