Search results

I got contact burns from this post.

83 242T As close to perfect maintenance wise as I can see. 2 new Bosch fuel pumps, new MEWH, new FP relay, all sensors are within spec and has remanned WUR. Was told by owner that pressures are where they should be fuel system wise. The car was not a factory intercooler car, but it has the...

TB, I come to you in my time of need. I recently purchased a 93 244. I really like the car, but it has some issues. In the typical TB fashion of fixing those issues, I am going to TB it up. That said, is the Pulsair system on an LH 2.4 car controlled by anything other than engine vacuum? One...

So, I did a thing. I needed a new daily, and this popped up on CL for 2k. Talked the guy down to 1k because it needs a new camseal and valvecover gasket. Low mileage and runs really, really well. Swapped the center stack over from the other car. I dont know what I'm doing to it currently...

1996 960 Sedan. Now that that is out of the way. I got the car for 400 bucks running and driving, super clean, garaged, old person owned. The A/C compressor seized and they were going to donate it for 200. I offered 400 and the car was mine. Swapped on a shorter belt and off I went. It is now...

Which was the best one? Im going to max out my car with oem stereo options. So far, im gathering its the 712+Cd changer

Is this the sort of thing most machineshops could do if they are good, or is it best to send it out to centerforce or the like for drilling?

Here is my car: Hamtown, USA. Population: Me. 93 HVAC and PS 93 Power Mirrors Cupholder Armrest 4.10/588 Truetrac 7003-Z Super Duty Trans / Deeworks Adapter Plate Yoshifab flywheel and ceramic clutch Nathaninwa rail / Fuelab pressure regulator / Aeroquip TFE Lines ID 1000 MS2 / DSM CAS / LS...

Are the 700 and 200 series oil cooler hoses the same? 81-90ish for both series.

I spent all day saturday at the PNP pulling the ac system from a 1993 240. All the lines, dryer, firewall plate, hvac box, wiring and relay for switch, condensor etc. I want to install all of this and ignore it for the next 5-10 years. I am going to re-use the compressor because it seems good...

1983 242T. I did the rear brakes on my car over the weekend. The right rear was metal on metal, the left rear was at 40% wear. The pads and rotors were both OEM volvo, and there is no indication they were changed at different times. The RR pistons required a C-Clamp and a bunch of effort to...

Oxalic acid.

Gonna put an 8mm spacer on rear, and cut a coil or two up front.

The forge 007 is a drop in replacement for the pierburg, and doesnt leak boost like my old pierburg did. Did you get the surround yet? I like where this is going.

Thats why I love Single Stage white

Nice. I never see tiii cars here :(. Ford wheel with turbonetics cover?

First off. What pp. Secondly, 60/48 cossie? Good choice. I'm running a ford 60/48 cossie with a vband and ported outlet. I'm looking for a turbonetics super 60 compressor to have it rebuilt and sit on shelf till I blow mine.

Nope. I like the contrast. I'll get your surround out. I've been working beaucoup hours at work.

Gotta try harder. The local Volvo indie has me on speeddial for 95 and older rwd.

Nice t5