Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hello Guest, welcome to the initial stages of our new platform! You can find some additional information about where we are in the process of migrating the board and setting up our new software here
I have been waiting a long time to get my goodies. It has been a long time since I started gathering stuff up for my 940's 12 second build, but the main pieces finally came in.
Nathan's work speaks for itself. It is a piece of artwork. I have to give a big 'ol THANK YOU to him for his...
The car is a 1993 940T.
Mods are:
RSI Stage 1 cam and TTR gear
Ebay IC and some piping.
Mike chips
EBC
3" DP and gutted cat to stock exhaust
MSD 6al
Before I go on, let me start by saying I drive this car like an old lady. I almost NEVER hit full boost, and drive under the speed limit in...
I didn't want to make a thread about this. I really didn't. I feel stupid as hell that I can't figure this out. This could even be placed in OT but I figured some other people might be confused as well. So forgive me. That and I didn't want to keep harassing Nathan:lol:.
For now, let's talk NA...
1995 Volvo 850GLT. This is an intermittent problem.
Car recently had a heater core(less than a year) and a firewall coupler thingy for the pipes of the heater core(summer time).
The car comes up to temp just fine. I crank on the blower fan and it blows cold air. Over an hour of driving and...
Car is nearly stock 940T. 13c turbo, 3"DP, gutted cat, chips, cam, ebc.
I have one setting(low) at 10psi, and the other(high) at 15psi.
I didn't notice until today but when I stomp it, it'll spool rapidly to 10ps(before 3k), then creep up to 15psi by 5k. Sometimes it settles down to 12psi...
At my 10psi setting, it holds. 15psi it pops off everytime when I launch, and sometimes when hitting it from a roll. I have 3" IC tubing. This isn't factory. I can't tighten the T bolt down anymore. It is at the outlet of the turbo. I have a feeling the little drips of oil(turbo spews a bit) is...
Okay, I'd try this, but this isn't something I am actively seeking to do. I just want to discuss it. Hell, mods feel free to toss it in OT if you see fit. I already have the AEM kit.
Would this work if you inserted the nozzle in the post IC pipe?
I am not trying to start a pre/post turbo...
I installed the OBX kit on our NA850. It is extremely loud. Like, I hear it from MILES away. The only place I can see that I could add another muffler is the straight section after the header(where the cat used to be).
What type of round muffler will get me the MOST muffle? Should I buy the...
1992(3?) 940T. I have been chasing a rough idle issue since I got the car. This may or may not be related.
I get the car driving after an EGR delete, and intake isolators. Other than having trouble making consistent boost, it ran pretty good. With of course, the ****ty idle. I didn't attach the...
Just asking. I see a lot of guys doing it, and even after some googling I couldn't find out why or how.
I see Buchkas doing it, this guy did it.
A local performance shop(Infamous Racing) bought a totaled S2k and are currently installing a 4g63 RWD setup with a tube front end. Why? Pros? Cons...
Come on ladies. Round up the whips. Last time I am going this season. I have a leaking wastegate, but I still want to go. I want to bring the NA850 too and see what she runs. I am forcing my dad to go again in the Porsche(:lol:).
Ian and Bill, you two need to stop being vaginas about going!
I am trying to eliminate my EGR. I don't want to take the valve out right now. I took out the tube going to the intake manifold. What thread/pitch is the nut that attacked the tube to the egr valve? I am gunna go to fastenal and just buy a cap./
1993 940t.
I installed a new oil trap last month and notice it was leaking. I pulled the manifold off to do my intake spacers and decided to see what was up. There is a plate shaped like a wide "U" that holds a wiring harness up. Does that sit under, or on top of the oil trap? It doesn't seem...
When it was explained in the original thread, it made perfect sense to me. Then I was bull****ting with Sarah's uncle Bruce(big volvo fan. Rebuilt transmissions his whole life) about Volvos and what I am doing.
I asked him about the accumulator mod. He looked at me like I had two heads. The...
I got my MSD from Badvlvo the other day. The rain has finally let up and I want to have at installing it. I went to MSD's website and found a lot of different instructions for various types of ignitions. Which one and I following? I tried google searching this on TB and everybody seems to wire...
I have a funky idle with my car. I know I just did a cam, but it isn't consistent. Sometimes stalls.
So I pressure tested it. The places I got leaks were:
The CBV line. I assumed this should his to some degree.
The EGR thingy. It was making a horrific sound. Like plowing on a piece of wax...
Best time of the nigh was 14.8@92. 60' was 2.1.
I was hitting 15s all night and my 60' were 2.3-2.5. I feel like I am going slow for what my car should do. I just don't know how to improve. Granted this night SUCKED. I had a ton of people come and everybody wanted to race my car or ride...
1993 940T. After long trips(to the track) I notice an oily spatter on my rear bumper. Car doesn't smoke so is it safe to assume my turbo is spitting oil? Cat is removed also.
I installed the cam. Had some minor issues installing it(I learned how to get TDC the hard way). After feeling lucky and getting the car running without any bent valves(that I can tell) it is running funny.
We got it to idle pretty smoothly for a while. It was hard to start at first, but it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.