• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

79. 144.gl. dimmer/rheostat switch

arcturus b

Member
Joined
Feb 27, 2025
Hi, i would like to pull out the switch so that i can bypass the rheostat. Does the whole switch assembly come out or do i need to remove the whole panel to access the rear of the switch
 
This switch
Hi, i would like to pull out the switch so that i can bypass the rheostat. Does the whole switch assembly come out or do i need to remove the whole panel to access the rear of the switch
 

Attachments

  • 20250506_094140~2.jpg
    20250506_094140~2.jpg
    294.4 KB · Views: 2
I'm pretty sure the switch is too large to fit through the hole in the console. This is a pic of the NOS one I have for sale on eBay.
s-l300.webp
 
I'm pretty sure the switch is too large to fit through the hole in the console.
If the dash plastic is the same as my early 240 that rectangular piece that the switch goes through does not come out like the other peices do for switches etc. It's just a hole for the rheostat. Pop the knob off the front of the switch and remove the thin threaded nut. Don't lose that nut... then pull the switch out from the back.
 
Back
Top