940 Trigger wheel

[Jonovlov]

Bought this Trigger wheel kit off a company on Ebay for B230 and they should have sent a diagram / fitting instructions but didn't and now wont answer emails or have a phone number that gets answered etc. Can anyone assist with a photo of one fitted or any further info that may assist. cheers.

edited to add the link
https://www.ebay.co.uk/itm/11440389...PSP5GV&hash=item1aa300d3f2:g:YEIAAOSwK0tiLInZ

probably worth pointing out that the pulley has a larger diameter than the trigger wheel

 

[fatcatbestcat]

That looks like one of those ones that gets mounted on the engine side of the crank pulley.

It would be helpful if you posted a link to the eBay listing, then someone on here might have already installed one of that type and can chime in.

 

[740atl]

Problem... the link also says b21/b23... that's because the b21/b23 crank pulley has holes in it for mounting such a trigger wheel... the b230 does not.... well I mean it has the oblong holes machined into it. Not sure if the b230 holes line up with the b21/b23 holes. Looks like somebody copied Dale's old design.

Klracing sells a b230 crank pulley with a machined edge for a trigger wheel... pick up a steel crank gear while you're at it. https://shop.klracing.se/sv/artiklar/multiremhjul-sats-volvo-b230-8v.html