Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I used 940 hydraulic parts (master, slave, etc) and modified the 240 pedal assembly to suit. Some of it's prepared and the work required is not difficult if you can cut and weld.
At the gearbox end you'll need either a pull type slave as shown above or to pull the box and change the fork and pivot (maybe bellhousing too) to a push type.
Some pics of what I did here - https://picasaweb.google.com/Chookhouse.Chooning/HydraulicClutch