• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Going from CPS to DSM CAS adapter

F

fastcomet

Active member
Joined
Oct 5, 2016
I have Minisquirt or MS2 and I want to go from the stock volvo 2.4 cps set up on the back of the block. I would like to go to yoshifab DSM Cas setup. My tune is setup and has run well last 4 years. My stock sensor went south on me, well while I was removing the stock on it broke on me? No I wasnt rough with it, to fix I will have to pull the trans. Does anybody have a link or would like to help guide me through the swap? I have the DSM Cas on hand. Currently Im running the stock 2.4 cps, the stock dist., volvo ignition amp, and stock coil. Thnank you for any help in adavance.
 
ty for link. can you still run single coil setup? Or does that need to be changed? Id like to run Coil near plug. Anyways thanks for the help.
 
You can't run a single coil setup without the original distributor&rotor that distributes the spark to 1 of 4 plugs. With the CAS, you'll need to use a wasted spark quad coil or coil-per-plug.

"I have Minisquirt or MS2" - do you mean MicroSquirt? If so, you can do coil-per-plug if the SPK A (IGN1), SPK B (IGN2), ALED and WLED outputs are available.
 
sorry but yes, the microsquirt is what I am running. I kind of figured Id have to go to diffent plug setup.
 
You must log in or register to reply here.
Back
Top