• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Injector help

mdubya79

mdubya79

Member
Joined
Aug 14, 2024
Location
Hertfordshire, UK
Hi, I'm having a nightmare sourcing injectors for my 940 turbo here in the UK. I have the green top Bosch, part number 0280150804.

My question is, is there an equivalent more readily available injector I could use instead of the originals???

Thanks šŸ‘
 
IMHO:
You could use the later Bosch 0-280-155-766 injectors found on (I believe) 850s and V70s, they are drop in.
They are 350cc flow vs. 337cc flow of the stock 0-280-150-804 injectors, so almost identical, the ECU should be able to adapt to that.
Bonus is that they have a better spray pattern for more even fuelling.
I use these in my 940T.

Only (very) important thing is that you have to bypass the ballast resistor because they are already high impedance.

1727460301291.png
 
One of the applications for them is US 1997 V70 T5 - that's from what I got the last set I had. Volvo PN# 9454557. Bosch PN# 0280155766.
 
mdubya79 said:
Fantastic, thanks for the info. How do I bypass the ballast resistor? I'm mechanically pretty good but the Volvo is all new to me!!!
Click to expand...
Disconnect the ballast resistor (shown below, mounted on inside left fender) and make a plug connecting all the wires together and plug that into the harness.
I made one like this myself - pic shamelessly stolen from: https://www.harrieco.nl/product/ballastbypass
1727469470669.png
 
From the old thread: https://turbobricks.com/index.php?threads/quick-injector-question.195964/

BALLAST_BYPASS.JPG
 
You must log in or register to reply here.
Back
Top