• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Measurments of a 12 tooth speedo tone ring needed.

Mattis

Mattis

Active member
Joined
Sep 11, 2007
Location
Norway, Trondheim
As the title says..
If anybody one of lying around, or possibly have an loose diff, I need the measurements of the center hole (the bit that's pressed onto the diff), and the outer diameter..

Swapping from 12 to 48 teeth, and it would be nice to know if it fits, before I strip the axle.
 
no clue if its fits, but what i did was i took a dremel and trimmed one "line" out of every other "line" leaving 24 teeth on my old non abs car. speedo worked great!
 
You must log in or register to reply here.
Back
Top