Plug&Play fuel pump upgrade volvo 940 intank

[sunday_driver]

Hello everyone,

I would like to install a new fuel pump for my upcoming increase in performance (max. 400 HP). I only have the original in-tank pump and am looking for a more powerful pump that fits plug & play. I'm overwhelmed with the search.

The connections in particular seem to be very different. I've never removed a pump before and don't know what to expect.
Does anyone have a tip for me? Thanks and greetings!


Edit: Volvo 940, 1995, B230FK, next Step --> 22T, 630er Deka

 

[240 240]

where is the pump that goes under the car?

 

[Pietercc]

where is the pump that goes under the car?

95 has no under car pump

 

[240 240]

95 has no under car pump

I scrolled past that part at the end.

 

[swizzy]

i run a walbro 255lph. buy it from a good seller. a lot of knockoffs around.

https://www.skandix.de/de/fahrzeug-...tstoffpumpe-elektrisch-reparatursatz/1010999/

here you can see what is needed to convert and do it yourself a lot cheaper..

 

[Westmees]

I’m a bit late to the party, but won’t you need a new relay and wiring to the pump? Just had my AEM pump in the mail but tought I had to do the whole wiring thing

 

[dl242gt]

I’m a bit late to the party, but won’t you need a new relay and wiring to the pump? Just had my AEM pump in the mail but tought I had to do the whole wiring thing

Yes, it's necessary to add a relay and heavier wire if you go to a more powerful pump than stock. The stock stuff is pretty good but if 400hp is the goal an upgrade is the right thing to do.

 

[Westmees]

Yes, it's necessary to add a relay and heavier wire if you go to a more powerful pump than stock. The stock stuff is pretty good but if 400hp is the goal an upgrade is the right thing to do.

That’s what I was thinking. It’s quite a bit more amps