• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Redblock main bearings

K

Karl Buchka

Active member
Joined
Mar 25, 2007
Location
Los Angeles
Where do you guys get your bearings? Looking for a set of standard sized main bearings for a rear thrust B230/B234. The cheapest I've been able to find is just under $100.
 
the glyco availability sucks now, between my three sources the stock floats around 0-2 and changes daily for all sizes.

the vandervell stock is even worse.

ACL not always available.

even the pro parts sweden and scan tech i can't get in right now.

and cost on them has gone up as well , so finding them any lower than $90-100 is gonna be slim.
 
fidel said:
the glyco availability sucks now, between my three sources the stock floats around 0-2 and changes daily for all sizes.

the vandervell stock is even worse.

ACL not always available.

even the pro parts sweden and scan tech i can't get in right now.

and cost on them has gone up as well , so finding them any lower than $90-100 is gonna be slim.
Click to expand...

dont say that. You are my ace in the hole for these things. Granted i need .25 OS and coated but either way i still need them. Round them up for me while you still can
 
You must log in or register to reply here.
Back
Top