Luk 22010 or 15 or 23

[h20ham]

These numbers all seem to work, of course I cant recall what I have used in the past.

22010 looks like earlier cars, 22015 middle, but also the 22023 falls from 86+
Any comments please

 

[doucheNozzle]

Wat

Edit://NVM

 

[h20ham]

Luk clutch, all say they will fit. Opinions, better-has anyone used any of these.
Going on a turbo car, suppose I should replace the PP bolts while in there (or not?)

 

[hiperfauto]

22010 is for 4 cylinders with flat flywheels.

22015 is for diesel engines.

22023 is for turbos with dog dish flywheels.

 

[dl242gt]

I used a borg warner 92268 clutch kit for 740 turbo in my 93 wagon. It had a LUK pressure plate in the kit. For dog dish flywheel.

 

[OldCarNewTricks]

Are the dog dish flywheels the same in the 240 and 740?

 

[h20ham]

22010 is for 4 cylinders with flat flywheels.

22015 is for diesel engines.

22023 is for turbos with dog dish flywheels.

I get confused, old, and some different information. I am not disputing this. Looking for confirmation please, or hoping someone has used them

The Luk site says 10, I am confused.
RockAuto says 15
Local parts say 15

https://aftermarket.schaeffler.com/...icles:TA-2794:topProductCategories:LUK_REPSET

22023 crosses to 10

So from what I can tell, they are all the same. I would suspect the Diesel manual is different.

 

[hiperfauto]

I used eEuroparts site for pictures and fitment info.

22010

22015

22023

 

[dl242gt]

Are the dog dish flywheels the same in the 240 and 740?

Yes, the flywheels are the same. There are two types the regular dog dish and the one
that has the LH2.4 sensor holes in it. They interchange on all redlbock ohc.

 

[classicswede]

Yes, the flywheels are the same. There are two types the regular dog dish and the one
that has the LH2.4 sensor holes in it. They interchange on all redlbock ohc.

4 types of dog dish
carb/Kjet that are blank
Motronic with two timing pins
Renix with 20-2-20-20
LH 60-2

clutches all fit the same including the D24 type