7/9 ipd lower chassis brace

[DMFWallace]

I'm wanting to buy a lower chassis brace from ipd but I'm doubting it will clear the 3" turboback exhaust. Anyone have any pictures or tips they can share? Anyone within 30 or so miles of stafford/fredericksburg VA that can let me try theirs on for size?

 

[boosted12a]

try here \l/ i think i have a pic of the brace i made that is based off of the ipd brace

http://forums.turbobricks.com/showthread.php?t=188195

 

[SquareD]

I guess it depends on the angle of the downpipe. I built my dp to mimic the angle of the stock dp. I ran the OE lower brace, which is similar to the iPd one on my 740 with a 3" downpipe and didn't having any problems. Now it has a cherry turbo brace, again no interference issues.

 

[740tankDriver]

i have the cherry lower brace with 3" too. no clearance issue. i suppose to be sure install the brace before a possible new downpipe is installed/fabricated.

 

[Sir Psycho]

I have the IPD lower brace and with my downpipe I was forced to put a couple washers between the brace and mounting holes to space it down a little bit for clearance.