• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Pig: '79 242 16vT

Sitrep. Pretty much nothing since June. Also haven?t forgotten to update thread, but too busy and too tired even for that.

NjJtTsOh.jpg


Y9QCPNhh.jpg


I1VAwF8h.png
 
Last edited:
Re: QSRC's - is this just a change to the "new style" with ackerman adjustment? I've considered that but never could justify the price, especially since I don't really understand ackerman adjustments.

Re: pull axle forward - didn't you already shorting your trailing arms? Ben if you read this I've been seeing teaser pics of the new adjustable rear arms forever lemme buy some!!!!

Re: turbo drain hose - I replaced mine every year forever because the header always ate it. No amount of heat shield could stop it. Bending a piece of stainless tube to make a hard section for one was such a great peace of mind mod for me.
 
Re: pull axle forward - didn't you already shorting your trailing arms? Ben if you read this I've been seeing teaser pics of the new adjustable rear arms forever lemme buy some!!!!

I've been working on them forever, :roll:

Just made the final tweaks to the arms themselves and have the adjustment plates mostly roughed out.

finalizing the drop brackets now.
 
I've been working on them forever, :roll:

Just made the final tweaks to the arms themselves and have the adjustment plates mostly roughed out.

finalizing the drop brackets now.

In an alternate universe my car runs and they?re needed. In this one they?ll look real good on the shelf for 6 months.
 
After years of messing around with every kind of fancy flexible material and heat shielding to boot, I too, have finally seen the light with using hardlines as much as possible. Those OEM's were on to something.
 
Back
Top